Mounter, Cranes, 2nd shift, Heil Environmental (2) f961.1

Date: Jun 3, 2021

Location: Fort Payne, AL, US

Company: Dover Corporation

Environmental Solutions Group encompasses industry-leading brands — Heil Environmental, Marathon, Bayne, The Curotto-Can, 3rd Eye, and Soft-Pak — to create a premier, fully integrated equipment group serving the solid waste and recycling industry. Through extensive voice-of-customer outreach, in-house engineering and manufacturing capabilities, a wide-reaching service network, and proven industry expertise, Environmental Solutions Group is focused on solving customer problems through environmentally responsible products and providing world-class support.  For more information, visit www.doveresg.com.


ESG is a Dover Corporation operating company. Dover is a diversified global manufacturer and solutions provider with annual revenue of approximately $7 billion. We deliver innovative equipment and components, consumable supplies, aftermarket parts, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of over 23,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.



Position Title: Mounter, Cranes

Operating Company: Environmental Solutions Group – Heil Environmental

Location: Fort Payne, AL

Shift: 2nd shift


Position Summary: 

Performs general structural and pressure welding using gas welding, electric arc, semi-automatic and automatic welding equipment of the submerged and gas shielded type. This position may also require work on any of the pieces of equipment in the plant and in any other classification.


Roles and Key Responsibilities:

  1. Must be able to lift 40 pounds repeatedly – a minimum of 2 times per day.
  2. Verifies sales orders to chassis layout drawings and body/options specifications.
  3. Makes own set-ups including:
    1. Positioning of fixtures.
    2. Setting of proper welding heat and rate of travel of welding wire and work.
    3. Load machine with wire and wire reel.
    4. Change gas or add flux as required.
    5. Check set-up and completed parts to ensure quality.
    6. Loads and unloads fixtures.
  4. Uses electrical or mechanical hoists as required.
  5. Directs the work of a helper when necessary.
  6. Removes slag from weld head.
  7. Directs the positioning and removal of parts and material in work area.
  8. Records the number of parts produced on time card and move ticket.
  9. Performs preventive maintenance, such as changing tips and adjustment of wire feed rolls.
  10. Checks job travelers for special instructions or notes BEFORE proceeding with job assigned.
  11. Verifies pressure settings.
  12. Performs housekeeping duties as necessary to keep work area safe, clean and in good order.




            - 16 oz. min. Ball Peen Hammer

            - 12' Tape Measure

            - Allen Wrenches up to 3/8"

            - Pliers & Wire Cutter Combination

            - Set of Common & Phillip Screwdrivers

            - Center Punch

            - 12" Adjustable Wrench



  1. Receives job prints, work order and/or instructions from supervisor and proceeds with a minimum of supervision and direction.
  2. Perform set up and welding operations on all types of welding machines having strict inspection and test requirements.
  3. Set up fixtures; adjust and regulate machine to obtain best possible penetration, fill, weld quality and performance.
  4. Make compensating adjustments to allow for variations and conditions. 
  5. Operate various types of equipment.
  6. Work is given process supervision and check; completed work is tested and inspected.
  7. Operator may be required to do pressure welding, by hand on some parts while running automatic welder simultaneously and in unison.
  8. Perform other work of similar of comparable nature incidental to the performance of the operation.
  9. Measure scribes, position, lay out materials, jigs or fixtures, etc., as necessary or directed to ensure completion of cycle, maintaining product quality.
  10. Assist new operators in learning the correct and safe operation of the equipment when required.
  11. Take good workman-like care of machines, tools, equipment work areas, etc.
  12. Operator is required to read and write and do arithmetic calculations necessary to perform the job.
  13. Requires knowledge of welding fundamentals.
  14. Required to read blueprints and maintain tolerances as shown on prints.



Education:  Requires a High School diploma or GED.

Knowledge: Requires ability to understand general arithmetic; ability to write in an understandable manner; understand verbal or written instructions; ability to read and understand instructions, lists and billing materials; use PC based applications, including Mainstar, Outlook, and Microsoft Office, knowledge normally acquired through high school or equivalent experience.

Mental: Requires normal attention with periods of high concentration intermittently to operate machinery approximately 50% of time.

Physical: Requires walking/standing approximately 70%, lifting up to 40 pounds approximately 15% of time; involves repetitive overhead work approximately 10% of time; involves repetitive stooping, forward bending and crouching approximately 5% of time.

Manual Dexterity: Requires use of hands, arms and feet for repetitive lifting; use of hands and arms to operate all manufacturing equipment, meters, chains hoists, automatic drills and general hand tools and to record written information.

Audible Demands: Requires ability to follow verbal instructions and to hear for safety purposes.

Visual: Requires the ability to visually observe essential functions for satisfactory job performance and safety; color and depth perception required.

Environmental: Involves exposure to plant environments with the presence of dust, fumes, noise, and fluctuating temperatures due to lack of climate control.


Note: Supersedes All Preceding Job Descriptions:

The above job description is intended to describe the general content, identify the essential job functions, and set forth the requirements for the performance of this job.  It is not to be construed as an exhaustive statement of job functions or requirements.


All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

This position may be located in: Americas : United States : Alabama : Fort Payne

Sub Division : Heil

Job Requisition ID : 37225

Nearest Major Market: Fort Payne

Job Segment: Engineer, Welding, Electrical, Inspector, Testing, Engineering, Manufacturing, Quality, Technology